JZP-5.2-SC Rubber Shock Absorber: Anti-Skid Floor Anchoring with Sub-Zero and High-Temp Elasticity
Quick Answer
The JZP-5.2-SC is a 5.2 kg friction-damping rubber shock absorber from the JZP-SC1 platform. Its Φ5.5 mm anchoring holes lock it to the floor so it cannot skid or drift, while its elastomer keeps dynamic elasticity from −45 °C up to +65 °C. It is offered in EPDM, FKM or silicone, and the rubber is vulcanized to the metal for a strong, lasting joint.
Anti-Skid and Anti-Drift Floor Anchoring — Why It Matters
Any mount that moves delivers the wrong isolation. Under traffic, machinery or seismic excitation, an unanchored isolator can walk out of position, altering the load path and detuning the whole system. The JZP-5.2-SC solves this with a 60 mm base and Φ5.5 mm bolt holes, so it is mechanically fixed to the structure. The mount stays exactly where it was designed to sit, cycle after cycle.
Technical Specifications (JZP-5.2-SC)
| Parameter |
Value |
| Model |
JZP-5.2-SC |
| Platform / Series |
JZP-SC1 |
| Anchoring |
Φ5.5 mm bolt holes, anti-skid, anti-drift |
| Nominal Load |
5.2 kg |
| Deflection at Rated Load |
≤ 0.3 mm |
| Resonant Frequency |
41.5 ± 5 Hz |
| Damping Ratio |
≥ 0.13 |
| Working Temperature |
−45 °C to +65 °C |
| Impact Rating |
100 G, 12 cycles |
| Elastomer Options |
EPDM / FKM / Silicone |
| Overall Diameter (D) |
60 mm |
| Overall Height (H) |
36 mm |
| Thread (d) |
M5 |
| Base (B) |
60 mm |
| Service Life |
Up to 8 years |
Typical Applications
- Industrial machinery and rotating equipment that must stay put.
- Precision instruments where drift undermines measurement.
- Control cabinets and electrical enclosures on vibrating floors.
- HVAC and pumping equipment needing quiet, stable support.
Key Takeaways
- Anchoring holes stop skidding and drift, protecting tuned performance.
- Dynamic elasticity holds from −45 °C to +65 °C.
- EPDM, FKM and silicone options plus a vulcanized metal bond for durability.
